.

Q-Temp

Non-eugenol temporary resin cement with fluoride, potassium nitrate and chlorhexidine
Indications
Temporary cementation of crowns and bridges

Properties
  • Firm Retention / Easy Removal. No re-cementing temporaries.
  • Eugenol-Free
. Non-irritating to soft tissue / will not inhibit permanent cementation.
  • Fluoride Release
  • Potassium Nitrate - Known to reduce sensitivity and act as a sedative to the pulp.
  • Chlorhexidine - A proven anti-bacterial agent.
  • Resin-Matrix Formulation.
  • Good marginal seal with no washout.
  • Two-Stage Curing. Initial gel-set stabilizes temporary, allowing easy removal of excess.
  • Automix Syringe - Saves application time, guarantees consistent mix.
  • Neutral Shade - Blends esthetically with temporary restoration / No show-through.

 

[accordion]

 

[accordion_item title='Scientific Papers']

  1. Dental Advisor Clinical report, November 2006.
  2. Crown retention and flexural strength
 with nine provisional cements, N. Lawson, J. O. Burgess, D. Mercante, Louisiana State University, New Orleans, USA, IADR Congress, 2006.
  3. CRA Buying Guide - Outstanding Products 2004, December 2006.
  4. CRA Buying Guide - Outstanding Products 2004, December 2007.
  5. Resin and Zinc-Oxide Temporary Cements, a Comparative Study, A. Valdman, K. Lizenboim, 
A. Khaskin, W.A. Mchale, H. Dodiuk-Kenig, and B. Zalsman, PEF-IADR Congress, Thessaloniki, Greece, 2007.
  6. Testing of crowns retention to various abutments utilizing different cements
, K. Lizenboim, A. Suvorov, B. Zalsman, and I. Suvorov, PEF-IADR, London, UK, 2008.
  7. Provisional Cements: The Optimal One for Your Clinical Needs, Clinicians Report, Volume 4, Issue 5, May 2011.
  8. Dental Advisor Clinical report, December 2015. The Dental Advisor 2016 Award Winner, January 2016.

 

 

[/accordion_item]

 

[accordion_item title='Packaging & Order Information']

  • Item # 100014
    Auto Mix - Intro
    1 Automix Syringe 5ml of Q-Temp
    10 Mix Tips
  • Item # 100015
    Auto Mix - Bulk
    4 Automix Syringe 5ml of Q-Temp
  • Item # 100010
    Hand Mix
    1 Syringe 10ml of Q-Temp Base
    1 Syringe 10ml of Q-Temp Catalyst
    1 Mixing Pad
    25 Mixing Spatulas

[/accordion_item]

 

[accordion_item title='Technical Data']

Flexural Strength

30 MPa

Film Thickness

10 μm

Solubility

7 μg/mm3

Water Sorption

22 μg/mm3

Linear Shrinkage

4.5 %

Exothermal Polymerization Temperature, Texo

31oC

Working Time @ 23oC

1.5 - 3.5 min

Initial Setting Time @ 37oC

1.5 - 2.0 min

Final Setting Time @ 37oC

3.0 - 4.0 min

Shelf Life

2 Years

[/accordion_item][/accordion]


MSDS Q-Temp Base 
EN

MSDS Q-Temp Catalyst EN

Instructions for Use EN IT FR DE ES RU KZ UA