High-Q-Bond Bracket

• Bonds chemically and mechanically for a superior bond, while flowing into the tightest mesh without bracket drift.
• A light-cure material - compatible with all curing units available on the market.
• Depth of cure is > 4 mm.
• Glass filled material designed specifically for orthodontic use that allows maximum penetration of filler into the finest screen mesh base.
• The viscosity of High-Q-Bond Bracket was designed to prevent adhesive run-on and bracket skating.
• Marketed since 2007 with no changes in formula. No complaints of any health-related or chemical performance issues were received.

Technical Data

Adhesive bonding to etched enamel: >15 MPa, in the 30 – 35 MPa interval.

Adhesive bonding to pretreated metal surface: > 10 MPa.

Adhesive bonding to pretreated porcelain surfaces: > 5 MPa.

Flexural strength: >50, in the 100 – 150 MPa interval.

Solubility: ≤7.5 μg/mm³

Water sorption: ≤40 μg/mm³

Light curing time: 10 – 20 seconds

Film thickness: ≤50 μm

Compatible with LED: Yes

Compatible with halogen light: Yes

Compatible with plasma ark light lamp: Yes

Shelf life: 2 Years

Instructions for Use

EN FR ES IT PT RO RU KZ  BL

Scientific Literature

1. The effect of different porcelain conditioning techniques on shear bond strength of stainless steel brackets, I. Gillis, M. Redlich, American Journal of Orthodontics and Dentofacial Orthopedics, p. 387-392, October 1998.Am.J.Or V18N3.pdf
2. A new multipurpose dental adhesive for orthodontic use: an in vitro bond-strength study, D. Harari, E. Aunni, I. Gillis, M. Redlich, American Journal of Orthodontics and Dentofacial Orthopedics, p. 307-310, September 2000.
3. Clinical research 200337_1.jpg
4. Clinical research: Ideal bracket adhesive system, Hadassah School of Dental Medicine, Hebrew University, 2003.
5. An in-vitro investigation into the use of a single component self-etching primer adhesive system for orthodontic bonding: a pilot study, K. House, J. Ireland, Journal of Orthodontics, Volume 33, No. 2, p. 116-124, June 2006.
6. Antibacterial orthodontic adhesive incorporating polyethyleneimine nanoparticles, N. Zalstman, D. Kesler Shvero, M. Perez Davidi, E. Weiss, N. Beyth, Hadassah School of Dental Medicine, Hebrew University , IADR Israeli Division Meeting, Israel, 2011.
7. Bond Strength and ARI Evaluation of Anti-Cariogenic Bonding Materials, M.C. King, Y. Fan, J.L. Hagan, P.C. Armbruster, R.W. Ballard, Program Number 1004, AADR Meeting, Tampa, USA, March 2012.
8. Bisphenol-A free alternatives for orthodontic adhesive systems, K. Lizenboim, I. Suvorov, H. Dodiuk, B. Zalsman, Program Number 118, PER-IADR Congress, Helsinki, Finland, 2012.
9. Bisphenol-A free dental polymeric materials, K. Lizenboim, H. Dodiuk, N. Iuster, T. Kidan, I. Suvorov, S. Kenig, B. Zalsman, Journal of Adhesion Science and Technology, Taylor & Francis, p. 1-17, iFirst article, September 2012.
10. Dr. César Ventureira, Professor at the Masters in Orthodontics and Dentomaxilar Orthopaedics at Universidad CEU-San Pablo in Madrid, Clinical evaluation report for High-Q-Bond Bracket, October 2015.

SDS

High-Q-Bond Bracket Adhesive EN

High-Q-Bond Bracket Primer EN

400060 High-Q-Bond Bracket LC Adhesive Kit

2 Syringes 1.2ml (1.5g) each of Q-Etch Ortho

1 Bottle 6ml of High-Q-Bond Bracket Primer

4 Syringes 2ml each of High-Q-Bond Bracket Adhesive

20 Dispensing Tips

25 Micro Brush Applicators

1 Mixing Pad

400061 High-Q-Bond Bracket LC Adhesive Compule Kit (Currently unavailable)

2 Syringes 1.2ml (1.5g) each of Q-Etch Ortho

1 Bottle 6ml of High-Q-Bond Bracket Primer

40 Compules 0.4g each of High-Q-Bond Bracket Adhesive

1 Compule Gun Syringe

20 Dispensing Tips

25 Micro Brush Applicators

1 Mixing Pad

400064 High-Q-Bond Bracket LC Adhesive Compule Refill (Currently unavailable)

40 Compules 0.4g each of High-Q-Bond Bracket Adhesive

400063 High-Q-Bond Bracket LC Adhesive Refill

1 Syringe 2ml of High-Q-Bond Bracket Adhesive

400065 High-Q-Bond Bracket Primer Refill

1 Bottle 6ml of High-Q-Bond Bracket Primer